Brightness Philips Led linear High Bay 100w/150w/200w/300w 50 /
60Hz with 50000 hours Long
- Lamp Power (W): 300
- Input Voltage (V): AC100~277V 50/60Hz
- Copper Substrate
- 24 Hours High Temperature Testing
- Easy Installation
- Ip Rating Ip65
- Brightness Decay < 5% / 6000 hrs
Philips Second Generation XMLB LED, high luminous efficiency and
MEAN WELL High efficiency LED Driver, the wide range input voltage
Heat pipe with fins cooling design, better cooling, light quality,
LED Tj < 85℃.
Excellent lampshade design, greatly improve the light utilization
Shell materials: Heat pipe and cooling fins for 1070 aluminum
Color: Silver white (Electrolytic shading)
Net weight:15.00Kg Unit:mm
|Input Voltage||AC100-277V||LED Brightness Decay||<5%/6000 hrs|
|PF||>0.95||Working Life||>50000 hrs|
|Driver Efficiency||>90%||Working Temperature||-30 - +40℃|
|Luminous Flux||39000 Lm||Storage Temperature||-40 -+80℃|
|Color Temperature||3000K/4000k/5000K/6500k||Protection Level||Wet Location/IP65|
UL LED linear High Bay Lighting series can be widely used in
outdoor, indoor or outdoor lighting(Wet location), like mechanical
or electronic processing workshops, storage warehouses, steel
mills, gas stations, toll booth, waiting rooms, the platforms of
railway station , indoor stadiums and flower cultivating tents etc.
1, BASED ON philips3030 TECHNOLOGY PLANFORM
Using XMLB LED of Philip Inc,Based on philips’s SC3 technology
platform,High efficiency and high reliability.
2, TESTING BY X-RAY
LED soft soldering testing by X-RAY for cold solder joint and
soldering related non-conforming.
Heat conductivity coefficient of copper substrate is 383.8W/m.K,but
the traditional aluminum substrate is about 2.0-3.0W/m.K.
4,USING DLC TECHNOLOGY FOR MPCB
Using DLC technology for MPCB module,heat conduction rate at
200W/m.K,lower junction temperature.
5,USING METAL POWDER ADHESIVE
Using high conduction adhesives 30W/m.K,not the heat conductive
silicone grease,it’s metal powder adhesive.
6,USING HEAT PIPE AND COOLING FINS FOR 1070 ALUMINUM ALLOY
Using heat pipe and cooling fins for 1070 aluminum alloy,fast
7,24 HOURS HIGH TEMPERATURE TESTING
High temperature testing room at 106℉,24 hours aging after aging.
30 minutes switch aging(10 seconds per cycle)