120W Outdoor Waterproof Led Gas Station Lights 400w MH / HPS / HID
|Wattage||Light Source||Lumens||CRI||CCT(Kelvin)||Rated Life||IP Pating||Beam Angle|
|Input Wattage||Input Voltage||Replacement||THD||Power Factor||Operating Temp.||Approved|
|75||120-277VAC,||250-300W Matel Halide/hps||<9%||>0.9||<55℃ @Ta=25 ℃||CE,ROHS,UL,DLC||Aluminum Heat sink and Glass|
|100||120-277VAC||300-400W Matel Halide/HPS||<9%||>0.9||<55℃ @Ta=25 ℃||CE,ROHS,UL,DLC||Aluminum Heat sink and Glass|
|120||120-277VAC||400-450W Matel Halide/HPS||<9%||>0.9||<55℃ @Ta=25 ℃||CE,ROHS,UL,DLC||Aluminum Heat sink and Glass|
IP65 Retrofit LED Gas Station Light with 3030 day light led ceiling
Ulight Canopy Light LED Canopy Light Retrofit Kits are designed to
replace existing under-canopy metal halide light fixtures in gas
station fuel pump canopies easily and cost-effectively.
CanopyLight petroleum canopy LED light retrofit kits use the
existing metal halide light fixture canopy mounting - no need to
disrupt canopy seals during installation, eliminating potential
roof leaks common with other canopy light retrofit procedures
1.Die-cast aluminum body with fins for heat dissipation
2.Universal input voltage: (120-277V), 75/120/100watts, 50/60Hz
3.With the best quality UL driver.E476797
4.With a heavy duty aluminum housing this product is built to last
for many years
5.Its rated lifetime of 50,000+ hours is naturally backed by
Mester's 5 year unlimited warranty.
6.IP65 waterproof ,dust-proof ,explosion-proof and anti-corrosion.
7.Reduce your electricity consumption drastically and receive
immense energy savings by replacing your
300-400W MH canopy lights with U-light's 120W LED Canopy gas
Competitive advantages & Application
1), Technical support :design and layout your project for free
2), Warranty: offer 5-year
3), Lead time: 3-5 working days for within 150pcs samples ,15-20
days for other quantity orders
|LED Light Source||Lumileds||Lumileds||Lumileds||Lumileds|
|Main Specification T=25℃|
|CCT(K)||Warm White/Natural white/Cool White4000-6000k|
|Lifespan (Hrs)||> 50,000Hours|
|Frenquency (Hz)||60/50 Hz|
|Power Factor||> 0.90|
|Time of starting (S)||0.2|
|Power Supply||UL listed Power supply(e476797)|
|Replacement||400W Matel Halide Light|
|Rotated beam angle||115|
|LENs||Acrylic LENs + waterproof loop|
|IP Rating||IP65 waterproof and dustproof|
|Certificate||Working Temp/humidity||-25℃ ～ 55℃,10% ～ 90% R.H.|
|Storage Humidity||-40℃ ～ 85℃,0% ～ 95% R.H.|
|IES files||Lighting simulations support|
Light Distribution Curve (Clear Glass)
EXAMPLE: WSD-GSK 12W 27-50K-A
Elsco Franciscan Upgrade Kit
- For nominal 23.8" x 23.8" (603mm x 603mm) shoebox luminaires
LSI Dakota or Masters Upgrade Kit
- For nominal 23" x 23" (584mm x 584mm) shoebox luminaires
Whiteway Riviera or Rig-A-Lite Upgrade Kit
- For nominal 21" x 21" (533mm x 533mm) shoebox luminaires
Elsco Merrit Upgrade Kit
- For nominal 20" x 20" (508mm x 508mm) shoebox luminaires
Jet Upgrade Kit
- For nominal 22" x 22" (559mm x 559mm) shoebox luminaires
-Embedded Installation with driver box.
|Mounting||Dim. “A”||Dim. “B”||Dim. “C”||Dim. “D”||Weight (lbs)|
|B1||12.8" (325mm)||22.0" (559mm)||17.6" (387mm)||2.2" (48mm)||14.00|
|B2||12.8" (325mm)||22.5"(572mm)||20.1" (510mm)||1.2" (31mm)||14.55|
|B3||12.8" (325mm)||20.6" (523mm)||18.3" (464mm)||1.2" (30mm)||13.20|
LED Gas Station Light Installation Guide
A. Embedded Installation Instructions
New: Drill holes in canopy at
desired center of light with 2in (50 mm) diameter metal
hole saw.127mm*127mm hole 4(12mm)
Disconnect wiring from the old fixture and remove fixture from
Clean installation area:
Clean surface with a cloth and cleaning agent. Continue with Step 1
of New Installation.
Step 1: Turn 4pcs M8 screws to the fixture, and make the fixture
hanged on the ceiling.
Step 2:Make the holes on the water-proof gasket go through the nuts
of the M8 screws and put the gasket on the ceiling,then make the
nuts of the M8 screws go through the keyholes on the mounting
bracket, and turn tightly the screws to fix the fixture to the
Step 3: Put a water-proof gasket both on the bottom of driver box
and the top of bracket, then fix with 4pcs M4 screws.
Step 4: Connect the DC wire of fixture to the DC wire of power
supply, and then connect the AC input wire.
Green Inova Services
- Customize services are available when needed. OEM/ODM available.
- More than 8 years experience R&D and sales engineers would
offer best lighting solution for projects.
- Best after services:Time tracking of customers' usage, collect
information to improve,fast action of dealing with problems in 48
- Quick action of technical support and maintenance.
Other wallpack ,parking lot light for choice
Best Quality, and Most Innovative LED products!